Centrifugal pump with trolley 3T/24M Sanitary

5.900 DKK excl. vat

Sanitary centrifugal pump in stainless steel (SUS304 and SUS316L).

Model 3T/24M/1.5KW


  • Delivers 3.000 liter pr hour
  • Lift 24 meter equivalent to 2,4 bar
  • The motor power is 1,5 KW.
  • Trolley with two wheels and handle

Available in different configurations with ABB motor 400 volt, 3 phase, 50 Hz.


  • Waterproof VFD for stepless speed control 


  • Inlet: 63,5mm triclamp
  • Outlet: 50,5 triclamp

Not in stock. Ask for delivery time


This model can deliver 3.000 liter pr hour, lift 24 meter equivalent to 2,4 bar. The motor is 1,5 kW.
We call it 3T/24M/1.5kW.

Available configurations:

  • 1T/14M/0.55KW
  • 3T/18M/0.75KW
  • 3T/24/1,5kW
  • 5T/24M 1.5KW
  • 5T/36M/3KW
  • 10T/24M/2.2KW
  • 15T/24M
  • 20T/24M

All models are based on ABB motor, 400 volt, 3 phase, 50hz.

Performance and advantages

The pump contains an open impeller that is single-stage and single-suction. The well-designed pump casing and impeller seat help to reduce resistance, eliminate dead angles and accelerate liquid flow rate, which contributes to better overall performance.

According to the open type impeller, the product allows cleaning-in-place (CIP) and works well in sanitary aspect. During operation it is stable, efficient and sanitary. With three adjustable legs and the 360 degree rotatable outlet, the sanitary centrifugal pump features convenient maintenance and flexible use.

Shaft Seal
The self-lubricating shaft seal belongs to mechanical seal with high tightness, no leakage and easy dismounting. It is resisatnt to wear, high temperature and corrosion.

All seals are designed for rapid maintenance, affordable cost, replaceable parts and long service life.


  1. Wetted parts, 316L or 304 stainless steel.
  2. other parts: 304 stainless steel.
  3. Auxiliary seal: EPDM, VWQ, FKM, PFTE.
  4. Mechanial seal graphite-silicon carbide.

Surface Finish

  1. Maximum inlet pressure: 0,5 MPa
  2. Temperature range: -10 degree C ~ + 140 degree C (EPDM)
  3. Flushable mechanical seal:
    Water pressure: <= 0,1 MPa
    Water quantity: 0,25-0,5 L/min.