Canit44 – 4-headed automatic can filling system

Apply for offer

Fully automatic 4-headed canning line with a capacity at 1.500-1.800 cans pr. hour (CBH).

Can filling machine is divided into four stations (heads) for filling and four stations (heads) for carbon dioxide purging. The filling and co2 are working independently.

The machine moves eight cans into working position at a time. The first four i filled with beer and the last four for carbon dioxide purging. Co2 purge is 2 seconds later than filling to prevent co2 premature purge and excessive dissolved oxygen. After filling, the filling head has the function of blowing bubbles to prevent oxygen from entering the beer.

Each filling head is equipped with independent foam control device and flow meter and dual control beer inlet switch. Automatic cover dropping and uncovered detection system: If the cap is not successfully lowered, it will enter the screed-cap area. It is detected that the lidless can will not be pushed into the screed-cap machine in the waiting area. Manual removal is required.

The transport chain plate is made of POM material with super high abrasion resistance and corrosion resistance. The control box is mounted independently for use in all directions.

 

 

Options: Flip Rinse Part (SKU 63710) and Rotation Infeed Table (SKU 63660)

Available on backorder

Description

Working procedure:

Put can -> constantly moving conveyer -> sanitizing flip rinse -> CO2 purge – > Beer filling -> cover lips -> Seamer -> exit rinse

  • Capacity: 1500-1800 cans/hour (330ml)
  • Beer loss: 1/100 kg.
  • Power: 3 Phases 400V 50Hz, can be customized
  • Power consumption: 2.0-3.5KW
  • Cylinder working pressure: 0.55~0.6Mpa.
  • Screw cap pressure: 0.2~0.25Mpa.
  • CO2 purge reserve pressure: 0.2~0.25Mpa.
  • Air consumption: 3m3/H.
  • CO2 consumption: 2m3/H.
  • Dissolved oxygen: <20 ppm.
  • Main Material: SUS304.
  • Beer Source Pressure: 0.15-0.2Mpa (22-30PSI) 5″ Triclamp.
  • Compressed Air: 0.50-0.70Mpa (75.0-105PSI) Ф10mm.
  • Jacking Cylinder Regulator: 0.20-0.30Mpa (30-45PSI).
  • CO2 Regulator: 0.15-0.2Mpa (22-30PSI) Ф10mm.
  • Flip-Rinse Sanitizer: 0.15-0.20Mpa(22-30PSI) 1.5″ Triclamp.
  • Exit-Rinse Water: 0.15-0.20Mpa(22-30PSI) 1.5″ Triclamp.
  • Control: Siemens PLC 200 smart.
  • Filling part with flowmeter.
  • Beer bottle type: To be customized (Sample offer by customer).
  • Wheels for easy moving around.
  • Total Size (W*L*H): 3.2 * 0.91 * 1.85 meter.
  • Total Weight: 340 kg.

Reviews

There are no reviews yet.

Be the first to review “Canit44 – 4-headed automatic can filling system”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

You may also like…