Bottle filler, semiautomatic 6-headed counterpressure (Fillmaster-RS18)

363.000 DKK excl. vat

Fillmaster RS18 is a semi-automatic counterpressure filler in German quality.

Beer and other CO2-containing beverages can be bottled under counter pressure in bottles and capped.

Up to 700 units of 0.5 liter bottles can be rinsed, filled and corked per hour.

The bottler Fillmaster RS18 has 18 (3 x 6) stations:

 It can be used to fill bottles (0.25l to 0.75l).
The filling speed can be adjusted continuously from 0.5 to 2 l/min by means of a throttle.

Not in stock. Ask for delivery time


The Fillmaster RS18 is a counter pressure filler for beverages containing CO2.

It has 18 stations: In the outer six stations, the bottles are rinsed with water before filling.

Filling takes place in the rear six stations, and the six middle stations seal the bottles with crown caps of diameter 26mm.

The RS18 is equipped with an automatic crown cork feeder. The bottles are filled under CO2 back pressure of up to 3 bar. The bottles are automatically pre-evacuated by a built-in vacuum pump.

In order to be able to control the filling process better, the bottles are illuminated by LED lamps. The filling process is automatically stopped by the control system when the target value is reached.

All process-relevant parameters can be set via the control system, which guarantees reliable reproducibility of all parameters during the entire filling process. The Fillmaster RS18 is equipped with high-quality steering rollers, so that it can be moved.

Ideally, beer should be bottled at a temperature of 1-2 ° C.

The bottler is controlled by a PLC. All process-relevant parameters such as filling quantity can be set via the control. This guarantees reliable reproducibility of all parameters throughout the filling process.

Product data

  • Dimensions H/W/d: 1910/870/930mm
  • Weight: 410kg
  • Filling Speed: 0,5 to 2l/min
  • Co2 operating pressure: max. 3bar
  • Operating pressure: 6 to 8bar
  • Electrical data: 240v 5a.

Scope of delivery

  • Six bottle holders as desired
  • Connection accessories for keg tap
  • Head or fermentation tank
  • Power Supply 12v 11a

Available accessories

  • Four foot extensions

Additional information

Weight 1 kg
Dimensions 93 × 87 × 191 cm

You may also like…