Bottle filler, semiautomatic 6-headed counterpressure (Fillmaster-R18)

272.300 DKK excl. vat

Fillmaster R18 is a manual backpressure filler in german quality. Beer and other CO2-containing beverages can be bottled under counter pressure in bottles and capped with bottle caps.

Up to 700 units of 0.5 liter bottles can be rinsed, filled and closed per hour.

The bottler Fillmaster R18 has 18 (3 x 6) stations:

In the outer stations, the bottles are rinsed with water before filling. In the back stations the actual filling takes place.

The filler can be mounted with an automatic capping unit (optional) (Model RS18).

Not in stock. Ask for delivery time


The filling takes place under CO2 backpressure of up to 3 bar. The pressure can be read on pressure gauges. The filling speed can be continuously adjusted by a throttle infinitely from 1.0 to 1.7 liters per minute. Since the filling quantity is measured, the filling process is automatically stopped by the controller when the setpoint is reached.

In front of the station is the closure of bottles with bottle caps.

To better control the filling process, the bottles are illuminated with LEDs. Ideally, beer should be bottled at a temperature of 1-2 ° C.

The bottler is controlled by a PLC. All process-relevant parameters such as filling quantity can be set via the control. This guarantees reliable reproducibility of all parameters throughout the filling process.


Product data

  • Dimensions: H/W/d: 1910/870/930mm
  • Weight: 380kg
  • Filling Speed: 0,5 to 2l/min
  • Co2 operating pressure: max. 3bar
  • Operating pressure: 6 to 8bar.
  • Electrical data: 240v 5a

Scope of delivery

  • Six bottle Holders as desired
  • Connection accessories for keg tap
  • Head or fermentation tank
  • power Supply 12v 11a

Available accessories

  • Conversion Set Fillmaster RS18 (automatiC CroWn Cork feeder)
  • Four foot extensions

Additional information

Weight 1 kg
Dimensions 93 × 87 × 191 cm

You may also like…