Description
- Material: SUS 304 Stainless steel.
- Volume: 1.000liter efficient, 1.330liter total volume.
- 25% clearance at the top without the arched top.
- Doomed top, 60 degree conical bottom.
- Double layer with cooling jacket.
- Working pressure: 2 bar. Tested up to 3 bar.
- Inner tank thickness: 4mm, outer garment: 2mm.
- Insulation of polyurethane, thickness: 100mm, sides and bottom are insulated.
- The cooling cap is welded in points to the tank.
- 2 cooling zones controlled separately: cylinder and conical base.
- Carbonation device (CO2 stone)
- Exterior: Polished.
- Internally polished, all welding surfaces are polished and cleaned with acid.
- Roughness: 0.4 um
- 4 stainless steel legs with adjustable feet. Option: Wheel.
- At the top: CIP arm, Sprayball, combined pressure and suppression valve (PVRV), hobport (blind plate with 4″ triclamp).
- Option: Butterfly valve on the entrance for dry hop.
- On the side: Glycol Inlet and outlet, thermo sensor and sampling port.
- Manhole in the top or side of your choice.
- At the bottom: drain valve, beer outlet, racking arm, carbonantion device and thermo sensor.
- CIP arm included Steam gauge.
- Mechanical pressure valve mounted on CIP arm.
- Prepared for half batches.
- Input and output for glycol cooling.
- Ball valve and solenoid valve to control glycol.
- Certified for sanitary use
- Pressure tested and certified according to PED regulations (EU)
Pictures are only for reference
