25HL 3-vessel brewing unit, M+L+K/W+HE

Apply for offer

A three vessel brew house as the basic configuration, which make two brews an a working day without problem. The system is also flexible for both infusion and decoction brewing.

Basic configuration:

  • 2500L mash tun
  • 2500L lauter tun
  • 2500L kettle/whirlpool tank

A optional hot water tank prepares hot water for both 1st and 2nd brews.

Prepared for continuous brewing which is more convenient and efficient.

For instance can the second mashing start during the first lautering process. This saves time spent on mashing process.

The hopback filter is configured to avoid any potential sucking problem on heat exchanger (there might be some solid material left after whirlpool progress).
Heat exchanger spec will be defined as the actual brew data like wort/water inlet/outlet temperature etc.

The brewery section demands about 6 x 12 meter space – about 4-5 meter to the ceiling depending on the demands for grain handling equipment.

Steam jacket for mash tun and kettle tun. Jacket installed on both cylinder and bottom section. A buffer tank configured to avoid vacuum problem during lautering process.

This configuration can be delivered in different size from 1000 to 6000 liter or more.

This is only the basic unit for brewing. Please check the following items to build a complete brewhouse:

Available on backorder

Description

2500L Mash tun 1 pcs.

  • Design pressure: Atmospheric
  • Material: AISI 304
  • Total volume: 3257L, effective volume: 2500L
  • Inner tank thickness: 3.5mm, outer cladding thickness: 2mm
  • Surface treatment: Fine polished and brighted
  • Inner tank treatment: polished, roughness: 0.4um
  • Cone top, cone bottom, Aluminum silicate insulation
  • Top fittings: Manhole with sight glass, light
  • Side fittings: Thermo well, liquid level (optional)
  • Bottom fittings:mash outlet, gearbox&motor
  • Steam jacket on both cylinder and cone bottom
  • Separately controlled steam jacket
  • Jacket with safety valve
  • AISI 304 stainless steel leg, diameter: 133mm, 4 pcs.s
  • Motor brand:VFD controlled
  • Stir type: paddle type
  • Central venting pipe
  • With recirculation unit for wort clearance.

2500L Lauter tun 1 pcs.

  • Design pressure: Atmospheric
  • Material: AISI 304
  • Total volume: 3387L, effective volume: 2500L
  • Inner tank thickness: 3.5mm, outer cladding thickness: 2mm
  • Surface treatment: Fine polished and brighted
  • Inner tank treatment: polished, roughness: 0.4um
  • Cone top, flat bottom, Aluminum silicate insulation.
  • Top fittings: Manhole with sight glass, light, warm water inlet
  • Side fittings: Thermo well, liquid level (optional)
  • Bottom fittings: counter washing device, wort collecting pipe
  • Bottom spent grain door, flange type
  • Wedge wired filter plate, with the gap of 0.7-0.9mm
  • Tank bottom with horn shape outlet for wort collecting
  • Rotating spray ball inside, qty: 2
  • Coil pipe for sparging
  • Bottom square frame support.
  • AISI 304 stainless steel leg, diameter: 133mm, 4 pcs
  • Motor brand: VFD controlled
  • Stir type: Shake and blade shape for better lautering effect
  • Central venting pipe

2500L Kettle/whirlpool tun 1 pcs.

  • Design pressure: Atmospheric
  • Material: AISI 304
  • Total volume:3500L , effective volume: 2500L.
  • Inner tank thickness: 3.5mm, outer cladding thickness: 2mm
  • Surface treatment: Fine polished and brighted
  • Inner tank treatment: polished, roughness: 0.4um
  • Cone top, cone bottom, 140 degree, Aluminum silicate insulation.
  • Top fittings: Manhole with sight glass, light
  • Side fittings: Thermo well, liquid level (optional), wort inlet
  • Bottom fittings: draining outlet, thermowell, steam jacket
  • Rotating spray ball inside
  • AISI 304 stainless steel leg, diameter: 133mm, 4 pcs
  • Central venting pipe
  • 6% evaporation
  • Steam jacket on both cylinder and cone bottom
  • Separately controlled steam jacket
  • Jacket with safety valve
  • Central venting pipe
  • Flat bottom with 1% slope
  • Tangent inlet at side place, DN50-DN32
  • Draining outlet at the lowest position
  • Two outlets at bottom of cylinder part

Mash pump 1 pcs.

  • Material: S/S 304
  • Sanitary grade
  • Flow rate: 10m3/h, lift height: 24m
  • With VFD control
  • Trip clamp inlet/outlet connection
  • Used for transferring liquid from mash tun to lauter tun

Lauter pump 1 pcs.

  • Material: S/S 304
  • Sanitary grade
  • Flow rate: 5m3/h, lift height: 24m
  • With VFD control
  • Trip clamp inlet/outlet connection
  • Used for transferring liquid from mash tun to lauter tun

Wort pump 1 pcs.

  • Material: S/S 304
  • Sanitary grade
  • Flow rate: 5m3/h, lift height: 24m
  • With VFD control
  • Trip clamp inlet/outlet connection
  • For self recirculation or transferring wort to HE.

50L Buffer tank 1 pcs.

  • Material: Interior AISI 304
  • With sight glass for inspecting
  • Spray ball inside
  • Wort inlet outlet
  • By pass for wort not going into buffer tank
  • Position: the same level with lauter tun filter plate
  • Function: Avoiding vacuum problem, protect tanks.

Hopback 1 set

  • Material: AISI 304 S/S
  • Volume: 10M3/h
  • Outer surface: mirror polished
  • Filter core inside, fitness: 80
  • Trip clamp connection with plate heat exchanger
  • Removable top lid, with venting valve
  • Pressure gauge installed for displaying inside pressure

Liquor blending unit 1 set

  • For mashing in and sparging
  • Inline temp displaying
  • Inlet for cold and hot water
  • Thermometer installed at the inlet to mash tun
  • Flow meter can be configured for checking liquor inlet amount
  • System includes Thermometer, piping works for cold and hot water mixing, butterfly valve/ball valve for flow rate adjusting, check valve, optional flow meter

Material/wort/water/CIP Piping work 1 set

  • Material: AISI 304 S/S
  • Sanitary grade
  • Argon arc welding
  • Single welded, double shapped
  • Trip clamp connection, with butterfly valves
  • Including pipes for mashing liquid, wort, cold/hot water and cleaning liquid transfer.
  • Butterfly valves with 8 position to control liquid flow.

Plate heat exchanger 1pcs.

  • High efficiency plate frame heat exchanger
  • Sanitary grade
  • Stage: Double
  • Tri clamp connection
  • EPDM gasket
  • Pressure: 5 bar
  • With thermometer for checking wort temp
  • With aeration unit for oxygenation.
  • Designed as the exact data from actual brewing
  • Including: wort inlet/outlet, cold water inlet/outlet temp, flow rate etc
  • The second stage is for backup, in case customer use glycol for cooling.

Working platform 1 set

  • Material: AISI 304 stainless steel
  • Type: plate with hole
  • Skid proof
  • Handrails on platform and steps
  • Convenient working height for brew house tanks
  • Designed as actual building requirement
  • The control panel can be mounted on the platform or below it.

Steam piping line 1 set

  • Material: SUS 304, sand polished pipes
  • Pneumatic valve for steam flow control, with stop valve
  • Pressure gauge, safety valve
  • Condensed water pipe
  • Condensed water can be connected together for reusing
  • Working pressure: 1 bar
  • Bigger piping size for improving heating efficient in Canda.

Please note this is only the brewing unit. Heating, hot water system, electronic control fermenters etc. are optional.

Additional information

Weight 1 kg