Brewery 10HL 3-vessel

597.900 DKK excl. vat

10HL 3-vessel brewing unit (brew house)

Fully automatic brewhouse unit with pnenumatic valve control. The whole brewhouse unit is installed on one platform.

Basic configuration:

  • 1000L mash tun
  • 1000L lauter tun
  • 1000L kettle/whirlpool tank
  • Plate Heat Exchanger (HE)

The mash tun is with steam heating and paddle agitator for mixing when mashing, the speed can be adjusted.

The lauter tun is with a wedge wired filter plate offers 12% filtration area. As customers preference, the blade direction and speed can be adjusted, spent grain can be achieved from side.

A buffer tank is configured and aligned with the lauter tun design avoiding vacuum effect during the lautering process, which also extend the using life of lauter tun.

The kettle/whirlpool tank is with steam heating, wort inlet for whirlpool tank is tangent, with different bigger inlet and smaller outlet size, which improves the flow rate after wort goes into the tank.

Sink is positioned on the platform for wort check.

Heat exchanger spec will be defined as the actual brew data like wort/water inlet/outlet temperature etc.

Control panel (optional):

  • PLC with Siemens S7-1200 software, which is possible for customer to make program by themselves. All electric fittings adopts word famous brand.
  • Portable control panel for brew house.

Alternative a manual version or semiautomatic version with PID-control instead PLC.

Available on backorder. Ask for delivery time

Description

1000L Mash tun 1 pcs.

  • Design pressure: Atmospheric
  • Material: AISI 304
  • Total volume: 1.700 liter
  • Effective volume: 1.000 liter
  • Inner tank thickness: 4.0mm, outer cladding thickness: 3.0mm
  • Surface treatment: Fine polished and brighted
  • Inner tank treatment: polished, roughness: 0.4um
  • Domed top head, cone bottom, Aluminum silicate insulation
  • Steam heating with steam jacket
  • Top fittings: Manhole with sight glass, light
  • Side fittings: Thermo well, liquid level (optional)
  • Bottom fittings: material outlet,gearbox&motor
  • Rotating spray ball inside, qty: 2
  • AISI 304 stainless steel leg, diameter: 133mm, 4 pcs
  • Motor: VFD controlled
  • Stir type: Paddle type
  • Central venting pipe

1000L Lauter tun 1 pcs.

  • Design pressure: Atmospheric
  • Material: AISI 304
  • Total volume: 1.700 liter
  • Effective volume: 1.000 liter
  • Inner tank thickness: 4.0mm, outer cladding thickness: 3.0mm
  • Surface treatment: Fine polished and brighted
  • Inner tank treatment: polished, roughness: 0.4um
  • Domed top head, flat bottom, Aluminum silicate insulation
  • Top fittings: Manhole with sight glass, light,gearbox&motor
  • Side fittings: Thermo well, liquid level (optional),spent grain door.
  • Bottom fittings: counter washing device, wort collecting pipe.
  • Wedge wired filter plate, with the gap of 0.7-0.9mm
  • Tank bottom with horn shape outlet for wort collecting
  • Rotating spray ball inside, qty: 2
  • Coil pipe for sparging
  • Bottom square frame support.
  • AISI 304 stainless steel leg, diameter: 133mm, 4 pcs
  • Motor brand: ABB, VFD controlled
  • Stir type: Blade type
  • Central venting pipe
  • With recirculation unit for wort clearance.

1000L Kettle/whirlpool tun 1 pcs

  • Design pressure: Atmospheric
  • Material: AISI 304
  • Total volume: 1.700 liter
  • Effective volume: 1.000 liter
  • Inner tank thickness: 4mm, outer cladding thickness: 3.0 mm
  • Surface treatment: Fine polished and brighted
  • Inner tank treatment: polished, roughness: 0.4um
  • Domed top head, cone bottom, 140 degree, Aluminum silicate insulation.
  • Top fittings: Manhole with sight glass, light
  • Side fittings: Thermo well, liquid level (optional), wort inlet
  • Bottom fittings: draining outlet, thermowell,
  • Steam heating with steam jacket
  • Rotating spray ball inside
  • AISI 304 stainless steel leg, diameter: 133mm, 4 pcs
  • Central venting pipe
  • Tangent inlet at side place
  • Draining outlet at the lowest position
  • Two outlets at bottom of cylinder part
  • Tube type heat exchanger can be configured if clients have special requirement on temperature when adding hops (opitonal)

Mash pump 1 pcs

  • Material: S/S 304
  • Sanitary grade
  • Flow rate: 3m3/h, lift height: 24m
  • Trip clamp inlet/outlet connection
  • VFD controlled
  • Used for transferring liquid from mash tun to lauter tun

Lauter pump 1 pcs

  • Material: S/S 304
  • Sanitary grade
  • Flow rate: 3m3/h, lift height: 24m
  • Trip clamp inlet/outlet connection
  • VFD controlled
  • Used for transferring liquid from mash tun to lauter tun

Wort pump 1 pcs

  • Material: S/S 304
  • Sanitary grade
  • Flow rate: 5m3/h, lift height: 24m
  • Trip clamp inlet/outlet connection
  • VFD controlled
  • Used for transferring liquid from mash tun to lauter tun

30L Buffer tank 1 pcs

  • Material: Interior AISI 304
  • With sight glass for inspecting
  • Spray ball inside
  • Wort inlet outlet
  • By pass for wort not going into buffer tank
  • Position: the same level with lauter tun filter plate
  • Function: Avoiding vacuum problem, protect tanks.

Hopback 1 set (alternative: Inline filter)

  • Material: AISI 304 S/S
  • Volume: 3M3/h
  • Outer surface: mirror polished
  • Filter core inside, fitness: 80
  • Trip clamp connection with plate heat exchanger
  • Removable top lid, with venting valve
  • Pressure gauge installed for displaying inside pressure

Liquor blending unit 1 set

  • For mashing in and sparging
  • Inline temp displaying
  • Inlet for cold and hot water
  • Thermometer installed at the inlet to mash tun
  • Flow meter can be configured for checking liquor inlet amount
  • System includes Thermometer, piping works for cold and hot water mixing, butterfly valve/ball valve for flow rate adjusting, check valve, optional flow meter

Material/wort/water/CIP Piping work 1 set

  • Material: AISI 304 S/S
  • Sanitary grade
  • Argon arc welding
  • Single welded, double shapped
  • Trip clamp connection, with butterfly valves
  • Including pipes for mashing liquid, wort, cold/hot water and cleaning liquid transfer.
  • Butterfly valves with 8 position to control liquid flow.

Piping switch panel 1 pcs

  • Material: AISI 304
  • Concentrated valves operation
  • With piping elbows, butterfly valves etc
  • Front side installed, under platform
  • It will not be higher than platform in order to move the whole unit easily.

Plate heat exchanger 1pcs

  • High efficiency plate frame heat exchanger
  • Sanitary grade
  • Stage: Double
  • Heat exchanging area:
  • Material: SUS stainless steel
  • Tri clamp connection
  • EPDM gasket
  • Pressure: 5 bar
  • With thermometer for checking wort temp
  • With aeration unit for oxygenation.
  • Designed as the exact data from actual brewing
  • Including: wort inlet/outlet, cold water inlet/outlet temp, flow rate etc
  • The second stage is for backup, in case customer use glycol for cooling.

Working platform 1 set

  • Material: AISI 304 stainless steel
  • Type: plate with hole
  • Skid proof
  • Handrails on platform and steps
  • Convenient working height for brew house tanks
  • Designed as actual building requirement
  • The control panel can be mounted on the platform or below it.
  • Sink is installed on the platform.

Please note: Heat water system (HLT) and control is optional.

Additional information

Weight 1 kg