500liter 3-vessel brewing unit, M+L+K/W+HE

317.100 DKK excl. vat

Basic configuration:

  • 500 liter mash tun
  • 500 liter lauter tun
  • 500 liter kettle/whirlpool tun

The mash tun is electric or steam heating with paddle type agitator.

The lauter tun with a wedge wired filter plate offers 12% filtration area. As customers preference, the blade direction and speed can be adjusted. Spent grain can be achieved from side.

As the actual production process, a buffer tank can be configured and aligned with the lauter tun design avoiding vacuum effect during the lautering process which also extend the using life of lauter tun.

The kettle/whirlpool tank is with electric heating or steam heating. Wort inlet for whirlpool tank is tangent with different bigger inlet and smaller outlet size,

which improves the flow rate after wort goes into the tank.

Heat exchanger specification will be defined as the actual brew data like wort/water inlet/outlet temperature etc.

Water heating system, fermentertanks etc. is optional.

Available on backorder

Description

500 liter mash tun, 1 pcs

  • Design pressure: Atmospheric
  • Material: AISI 304
  • Total volume: 715 liter
  • Effective volume: 500 liter
  • Inner tank thickness:2.5mm, outer cladding thickness: 2mm
  • Surface treatment: Fine polished and brighted
  • Inner tank treatment: polished.
  • Domed top head, cone bottom, Aluminum silicate insulation
  • Top fittings: Manhole with sight glass, light,gearbox&motor
  • Side fittings: Thermo well, liquid level (optional)
  • Electric heating or steam heating.
  • Rotarying spray ball inside, qty: 2
  • AISI 304 stainless steel leg
  • Stir type: Paddle type
  • Central venting pipe
  • With recirculation unit for wort clearance.

500 liter lauter tun, 1 pcs

  • Design pressure: Atmospheric
  • Material: AISI 304
  • Total volume: 715 liter
  • Effective volume: 500 liter
  • Inner tank thickness:2.5mm, outer cladding thickness: 2mm
  • Surface treatment: Fine polished and brighted.
  • Inner tank treatment: polished.
  • Domed top head, flat bottom, Aluminum silicate insulation.
  • Top fittings: Manhole with sight glass, light, gearbox & motor.
  • Side fittings: Thermo well, liquid level (optional).
  • Bottom fittings: counter washing device, wort collecting pipe.
  • Side spent grain door, flange type.
  • Wedge wired filter plate, with the gap of 0.7-0.9mm.
  • Tank bottom with horn shape outlet for wort collecting.
  • 2 Rotating spray ball inside.
  • Coil pipe for sparging.
  • Bottom square frame support.
  • AISI 304 stainless steel leg.
  • Stir type: Blade type.
  • Central venting pipe.
  • With recirculation unit for wort clearance.

500 liter Kettle/whirlpool tun, 1 pcs

  • Design pressure: Atmospheric.
  • Material: AISI 304.
  • Total volume: 715 liter
  • Effective volume: 500 liter
  • Inner tank thickness: 2.5mm, outer cladding thickness: 2mm.
  • Surface treatment: Fine polished and brighted.
  • Inner tank treatment: polished.
  • Domed top head, cone bottom, 140 degree, Aluminum silicate insulation.
  • Top fittings: Manhole with sight glass, light.
  • Side fittings: Thermo well, liquid level (optional), wort inlet.
  • Bottom fittings: draining outlet, thermowell.
  • Electric heating with electric heater.
  • Steam heating with steam jacket.
  • Rotating spray ball inside.
  • AISI 304 stainless steel leg.
  • Central venting pipe.
  • Flat bottom with 1% slope.
  • Tangent inlet at side place.
  • Draining outlet at the lowest position.

Mash pump, 1 pcs

  • Material: S/S 304.
  • Sanitary grade.
  • Flow rate: 3m3/h, lift height: 18m.
  • Triclamp inlet/outlet connection.
  • Used for transferring liquid from mash tun to lauter tun.

30 liter buffer tank, 1 pcs

  • Material: Interior AISI 304.
  • With sight glass for inspecting.
  • Spray ball inside.
  • Wort inlet outlet.
  • By pass for wort not going into buffer tank.
  • Position: the same level with lauter tun filter plate.
  • Function: Avoiding vacuum problem, protect tanks.

Hopback, 1 set

  • Material: AISI 304 S/S.
  • Volume: 3M3/h.
  • Outer surface: mirror polished.
  • Filter core inside, fitness: 80.
  • Trip clamp connection with plate heat exchanger.
  • Removable top lid, with venting valve.
  • Pressure gauge installed for displaying inside pressure.

Liquor blending unit, 1 set

  • For mashing in and sparging.
  • Inline temp displaying.
  • Inlet for cold and hot water.
  • Thermometer installed at the inlet to mash tun.
  • Flow meter can be configured for checking liquor inlet amount.
  • System includes Thermometer, piping works for cold and hot water mixing, butterfly valve/ball valve for flow rate adjusting, check valve, optional flow meter.

Material/wort/water/CIP Piping work 1 set

  • Material: AISI 304 S/S.
  • Sanitary grade.
  • Argon arc welding.
  • Single welded, double shapped.
  • Trip clamp connection, with butterfly valves.
  • Including pipes for mashing liquid, wort, cold/hot water and cleaning liquid transfer.
  • Butterfly valves with 8 position to control liquid flow.

Piping switch panel, 1 pcs

  • Material: AISI 304.
  • Concentrated valves operation.
  • With piping elbows, butterfly valves etc.
  • Front side installed, under platform.

 

 

Additional information

Weight 1 kg