800liter 2-vessel brewing unit, M/L+K/W+HE)

Apply for offer

A two vessel brewhouse in its basic configuration. With a hot water tank the unit will allow one to two brews per day.

The mash/lauter tun with a wedge wired filter plate offers 12 % filtration area. The stir/blade direction and speed can be adjusted, spent grain can be achieved from side.

A buffer tank can be configured and aligned with the lauter tun design avoiding vacuum effect during the lautering process, which also extend the using life of lauter tun.

The kettle/whirlpool tank with electric heating. The electric elements is installed in the tank.

Wort inlet for whirlpool tank is tangent, with different bigger inlet and smaller outlet size, which improves the flow rate after wort goes into the tank.

It can be configured with a hopback/hopfilter or inline filter before wort goes into plat heat exchanger, to avoid the sucking problem during the wort cooling process.

Available on backorder

Description

Mash/lauter tank

  • Gross volume 1.142 liter
  • Effective volume 800 liter
  • Material AISI 304
  • Design temperature 150 degrees
  • Working temperature 100 degrees
  • Wall thickness 2.5 mm
  • Cone angle 140 degrees
  • Insulation material Rockwool
  • Insulation thickness 60 mm
  • Outer cladding thickness 2 mm
  • Agitation Top
  • Stir type blade
  • Agitation rotation 0-30 rpm
  • Speed controlled 3-4(optional) m/s
  • Domed top
  • Top manhole
  • Sight glass
  • Sight glass light
  • Liquid level display
  • Temperature display
  • CIP cleaning rotary head
  • Leg adjustments bolt
  • Condensed water outlet
  • Agitation rotation speed controlled
  • Grain spending out speed 2-4 rpm
  • Filter plate – bottom distance 10-20 mm
  • Wedge wired false bottom filtration plate
  • Speed controlled
  • Sparging pipe
  • Spent grains outlet Side
  • Grain spending door Side
  • Slope installed

Kettle/whirlpool tank

  • Gross volume 1.142 liter
  • Effective volume 800 liter
  • Material AISI 304
  • Design temperature 150 degrees
  • Working temperature 100 degrees
  • Wall thickness 2.5 mm
  • Cone angle 140 degrees
  • Insulation material Rockwool
  • Insulation thickness 60 mm
  • Outer cladding thickness 2 mm
  • Electric, gas or steam heating
  • Top manhole
  • Sight glass
  • Sight glass light
  • Liquid level display
  • Temperature display
  • CIP cleaning rotary head
  • Leg adjustments bolt
  • Condensed water outlet
  • Domed top
  • Tangent wort inlet port
  • 2 Wort outlet
  • Cylinder part Optional
  • Conical part
  • Bottom draining port

Mash pump

  • Capacity 3 m3/hr
  • Pressure head 18 m
  • Material AISI 304
  • Frequency controlled
  • Seal Single end

Plate heat exchanger

  • Frame material AISI 316
  • Plate material AISI 316
  • Wort inlet temperature 95 degrees
  • Wort outlet temperature 15 degrees

Additional information

Weight 1 kg